LS1 LS2 LS3 Swap Corvette Fuel Filter w/ Fittings Kit BLACK AN6 Rail/Tank

Description

New LS swap filter kit.  This kit includes the 99-03 Corvette fuel filter, which has a fixed output pressure of 58-62 PSI, and 4 AN6 conversion fittings, for easy LS swap plumbing.  3 fittings are for the fuel filter, and 1 fitting is for the fuel rail.  This kit includes
anodized black
fittings as shown (fuel filter outlet is natural finish), all in AN6, and are the "screw latch" style fittings that thread into themselves once installed and cannot pop off.  This includes a PTC fuel filter.  This only works on LS fuel rails with a single fuel line.  This DOES NOT work with the 97-98 LS1 Corvette nor 99-06 trucks with dual fuel line rails.  You will need to supply your own (or order from us) AN6 line and hose ends.  This kit is good for roughly 500 HP.  You will need a fuel pump that has an operating pressure between 70-100 PSI (not included).  This can be mounted anywhere, front or back, it is always suggested to be mounted away from heat and moving parts for safety reasons.
How does this plumb?
This filter has 3 ports, 1 inlet, 1 outlet and 1 return.  Your pump pushes fuel into the filter inlet, then the filter return runs back to the fuel tank.  The fuel filter outlet runs to the fuel rail.  No other regulator is required. That is it!